Supershine Extra Wetlook Floor Seal 1 X 5 LitresFeatures: - High quality 'wet look' shine for improved appearance. - Thermoplastic polymer protects the floor. - Builds good slip-resistance. - No health and safety concerns. A high quality acrylic polymer-based metallised floor polish, which dries to a deep gloss and burnished to an outstanding 'wet-look' finish, with excellent slip resistance. An ultra modern polish, which offers gloss, ultimate durability, and the perfect base to clean, protect and prolong the life of the floor. Suitable for use on non-porous floors, uncluding; vinyl, thermoplastic, linoleum, rubber, asphalt, sealed wood, marble and terrazzo. Possible areas of use include hospital corridors and wards, schools, offices, shops, airports, village halls, etc. Directions Preparation: To obtain optimum results, it is important that thorough preparation of the floor is undertaken. The floor must be thoroughly cleaned to remove all dirt, grease and old polish films by using a quality polish remover such as Super Strip. The floor must be well rinsed with water and allowed to dry before applying Supershine Wetlook. Application: Apply a thin film of Supershine Wetlook (undiluted) using a mop or polish applicator. Drying time is normally around 30 minutes. Apply a second coat and allow to dry. Coverage is dependent on the porosity of the floor covering. In general, 5 litres of Supershine Wetlook will cover approximately 300 square metres of floor.
Not yet rated
|
 MW440/PUMP Multi Surface Floor Cleaner)
)
